Subscribe to Our Youtube Channel
Related Manuals for Analytik Jena Biometra TOne
Summary of Contents for Analytik Jena Biometra TOne
- Page 1 Setup Instructions Biometra TOne High-performance thermal cycler for DNA amplification by PCR...
- Page 2 Biometra GmbH (Teil der Analytik Jena GmbH) Manufacturer Rudolf-Wissell-Str. 30 37079 Göttingen Germany Phone + 49 551 50 68 6-0 + 49 551 50 68 6-66 Email info@analytik-jena.com Biometra GmbH Service Rudolf-Wissell-Str. 30 37079 Göttingen Germany Phone + 49 551 50 68 6 -10, -14 or -16...
-
Page 3: Table Of Contents
Notes on this Setup Instruction ..................4 Intended use ........................4 Safety instructions ...................... 6 General notes ........................6 Safety markings on Biometra TOne .................. 6 Technical condition ......................6 Requirements for the operating personnel ..............7 Safety instructions: transport and installation ..............7 Safety instructions –... -
Page 4: Basic Information
Provides information on potential material or environmental damage. Intended use The Biometra TOne is an end-point thermal cycler. It is designed to amplify nucleic acids by repeated cycles of heating and cooling using DNA polymerases in a PCR reaction. The thermal cycler is developed for Research Use Only (RUO). - Page 5 Biometra TOne Basic information information and program parameters can be entered directly on the screen. Due to the high ramp rates, the TOne thermal cycler is suitable for fast PCR applications, thereby helping to shorten program run times. Deviations from the intended use described in this short instruction and in the operating manual result in limitations of warranty and liability during a damage event.
-
Page 6: Safety Instructions
Biometra TOne Safety instructions General notes For your own safety and to ensure error-free and safe operation of Biometra TOne, please read this chapter carefully before commissioning. Besides the safety instructions in the operating manual and the local safety regulations... -
Page 7: Requirements For The Operating Personnel
On receipt of Biometra TOne, please verify that the delivery is complete and check for possible transport damage. In the event of a claim, please contact Analytik Jena. The Biometra TOne is designed for indoor use only and not for installation and oper- ation in a wet environment. -
Page 8: Safety Instructions: Protection Against Explosion And Fire
Life-threatening electrical voltages may occur in the interior of Biometra TOne! The following has to be observed: Any work on the interior of the device may only be carried out by the Analytik Jena service department and specially authorized technicians. -
Page 9: Handling Of Samples, Auxiliary And Operating Materials
Safety instructions – maintenance and repair Biometra TOne is usually repaired by the Biometra GmbH/Analytik Jena AG service de- partment or by authorized and trained specialist personnel. Unauthorized repairs can damage the device. Therefore, the operator may generally only carry out the tasks listed in the operating manual. -
Page 10: Device Installation And Commissioning
Commissioning Place the Biometra TOne thermal cycler on a solid, non-flammable surface in a se- cure and dry environment. Consider the specific ambient conditions: 15 °C to 30 °C, max. -
Page 11: Setting The Operating Voltage
The Biometra TOne thermal cycler can be operated at 100, 115 or 230 volts. The cur- rent setting is indicated on the voltage selector switch on the underside of the controller. -
Page 12: Functional Elements
Fig. 1 Biometra TOne front view Dial for adjusting the contact pressure Display Lid closing button USB port Biometra TOne rear view Fig. 2 Biometra TOne PCR module rear view Ethernet port Fuse holder Mains switch Mains plug Version 01.21... -
Page 13: Operation
For further information please check out the operating manual of the device. These manuals are included in electronic form on USB flash drive. Alternatively, you can find the operating manual on the Analytik Jena homepage in the download area of the corre- sponding device.
Need help?
Do you have a question about the Biometra TOne and is the answer not in the manual?
Questions and answers