About Installation And Operation <For Customer And Installation Personnel - Defi -Link ADVANCE DF17701 Operation Manual

2.2. About installation and operation
<for customer and installation personnel>
Warning
Do not disassemble or modify this product. Such actions will not only void the warranty
but also damage or destroy the product.
Disassemble/modify
Do not operate while driving.
Discontinue use of this product if it doesn't operate, water gets into the unit, or smoke or
a strange odor comes from the unit. If such a condition occurs, contact the store or
installation personnel as soon as possible.
Continued use while the condition exists could result in an accident or fire. Please have
this product installed by store professional or dealer where it was purchased. Installation by
the customer will void the warranty.
In the case any of the warning lamps of vehicle (check engine lamp, etc.) is lighted, stop
the vehicle and turn off the engine immediately. After turning off the engine, detach this
product from the OBDII connector. Continued use while in a faulty state could result in
accidents or malfunction.
In order to ensure safe driving, check the information on the gauge only for a short
period of time. Looking at the display for a long period of time could distract attention from
the road and result in an accident.
Fix the switch unit and other parts tightly to the vehicle to avoid that children swallow
those.
Caution
Do not pull the wires out of connectors forcefully. The connectors may be broken and
the wires may be cut. When pulling out the wires, press the lock firmly and unclip the
locks of connectors.
On no event will Nippon Seiki Co., Ltd. be liable to you for any damages arising out of the
use or inability to use the product, even if Nippon Seiki Co., Ltd. has been advised of the
possibility of such damage.
ADVANCE Control Unit SE Manual 9 Return to top