Philips HR2665 User Manual page 8

ENGLISH
10
Cleaning
1 Disconnect the plug from the power outlet.
2 Remove the mixing chamber lid. (Fig. 3)
3 Loosen the front panel control knobs. (Fig. 4)
Note: The front panel is heavy. Take extra caution when removing it.
4 Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle,
and the mixing chamber in order. (Fig. 5)
5 Use a dry cloth to clean flour residue on the main unit. (Fig. 30)
6 Clean the shaping disc with the supplied cleaning tool to remove the dough residues.
After that, you can clean it with water. (Fig. 31)
Note: Let the discs air-dry for 2 to 4 hours, then use the corresponding cleaning tool to
poke out the dough in the holes.
7 Clean all detachable parts, and wipe them dry. (Fig. 6)
8 Use a dry cloth to clean the control panel, and the exterior of the pasta
Storage
1 Unplug the appliance and let it cool down. (Fig. 29)
Note: Make sure all parts are clean and dry before storing.
2 You can store the shaping discs in the storage drawer. (Fig. 33)
Note: Put the thicker shaping discs in slots with icons and , and put the thinner shaping
discs in the slots with icon . (Fig. 34)
(Fig. 29)
maker. (Fig. 32)