Philips HR2665 User Manual page 10

ENGLISH
12
Problem
Unable to make pasta
successfully with the
liquid calculation
function.
E1 displays on the
screen.
The appliance stops
during processing, E2
displays on the screen,
the indicators are
flashing quickly, and
the alarm sounds.
E3 displays on
the screen during
calibration.
E4 displays on the
screen.
E3 or E4 displays
permanently on the
screen after restarting.
Cause
The required liquid
amount indicated on the
display screen does not
apply to some recipes (for
example cookies, gluten
free pasta).
The shaping disc is not
attached.
The lid is not in place or
not properly attached.
The mixing paddle may
be blocked by some
foreign objects.
The dough may be too
dry.
The wrong program is
selected.
The mixing chamber
lid is still closed on the
appliance.
The appliance
malfunctions.
The appliance
malfunction.
Solution
These recipes require you to skip the
liquid calculation part. In this case,
press the Start/pause button for
5 seconds, and the appliance will start
mixing and extruding directly.
Attach the disc holder to the main
unit, attach the shaping disc properly
and fix the front panel properly to the
device.
Attach the lid properly.
Disconnect from the power source,
clean the pasta maker, and follow the
user manual again to restart the pasta
making.
1 Remove the mixing chamber
lid from the appliance to start
calibration.
2 Switch off and unplug your Pasta
Maker. Plug in and restart the
device.
Switch off and unplug your Pasta
Maker. Plug in and restart the device.
Contact the service center