Nordson Trilogy GP Customer Product Manual
Air spray siphon fed manual spray guns
Hide thumbs
Also See for Trilogy GP:
- Customer product manual (19 pages) ,
- Customer product manual (23 pages)
Table of Contents
Advertisement
Quick Links
Trilogy
GP and LVLP Air
®
Spray Siphon Fed Manual
Spray Guns
Customer Product Manual
Document Number
1601056-05
Issued 12/21
For parts and technical support, call the Industrial Coating
Systems Customer Support Center at (800) 433-9319 or
contact your local Nordson representative.
This document is subject to change without notice.
Check
http://emanuals.nordson.com
for the latest version.
NORDSON CORPORATION • AMHERST, OHIO • USA
Advertisement
Table of Contents
Related Manuals for Nordson Trilogy GP
Summary of Contents for Nordson Trilogy GP
- Page 1 For parts and technical support, call the Industrial Coating Systems Customer Support Center at (800) 433-9319 or contact your local Nordson representative. This document is subject to change without notice. Check http://emanuals.nordson.com for the latest version. NORDSON CORPORATION • AMHERST, OHIO • USA...
-
Page 2: Table Of Contents
Nordson Corporation welcomes requests for information, comments, and This is a Nordson Corporation publication which is protected by copyright. inquiries about its products. General information about Nordson can be found on Original copyright date 2012. No part of this document may be photocopied,... - Page 3 Change Record Change Record Revision Date Change 6/12 Initial Release. 7/13 Added compliance kits and instructions. 2/16 Updated parts lists. 9/20 Updated parts lists. 12/21 Updated parts lists. 1601056-05 © 2021 Nordson Corporation...
- Page 4 Change Record 1601056-05 © 2021 Nordson Corporation...
-
Page 5: Safety
Intended Use Use of Nordson equipment in ways other than those described in the documentation supplied with the equipment may result in injury to persons or damage to property. Some examples of unintended use of equipment include •... -
Page 6: Personal Safety
The National Spray Equipment Manufacturers Association has created a wallet card that you should carry when you are operating high-pressure spray equipment. These cards are supplied with your equipment. The following is the text of this card: 1601056-05 © 2021 Nordson Corporation... -
Page 7: Fire Safety
• Do not smoke, weld, grind, or use open flames where flammable materials are being used or stored. • Do not heat materials to temperatures above those recommended by the manufacturer. Make sure heat monitoring and limiting devices are working properly. 1601056-05 © 2021 Nordson Corporation... -
Page 8: Fire Safety (Contd)
Iodine “Iodo-” Check your material SDS or contact your material supplier for more information. If you must use halogenated hydrocarbon solvents, contact your Nordson representative for information about compatible Nordson components. Action in the Event of a Malfunction If a system or any equipment in a system malfunctions, shut off the system immediately and perform the following steps: •... -
Page 9: Description
102−247 l/m (3.6−8.7 cfm) Sound Pressure Level (A) 2 bar (28 psi): 76 dB/A (A) Sound pressure level measurements and specifications are in accordance with Third regulation to apparatus safety law DIN 45635 part 1/04.84. 1601056-05 © 2021 Nordson Corporation... -
Page 10: Installation
Figure 1 Trilogy General Purpose Air Spray and LVLP Gun Components 1. Siphon hose fitting (3/8 in. NPSM) 2a. Lock nut 4. Fan pattern regulator 2. Material flow regulator 3. Air flow regulator 5. Air hose coupling 1601056-05 © 2021 Nordson Corporation... -
Page 11: Atomizing Air Adjustment
See Figure 2. The position of the atomization air cap and the nozzle determines the orientation of the fan pattern. 1. Loosen the air cap retaining ring. 2. Rotate the air cap to the desired position, hold it in position, then tighten the retaining ring securely. 1601056-05 © 2021 Nordson Corporation... -
Page 12: Coating Tips
• Immerse the gun nozzle in solvent or waterborne cleaning solution during pauses in production to prevent coating material from hardening on the nozzle. 25 30 cm even even even (10 12 in.) RIGHT thin thin thick Fan Pattern/Air Cap Orientation WRONG Figure 2 Spray Gun Operation 1601056-05 © 2021 Nordson Corporation... -
Page 13: Lvlp Compliance Kit Installation And Use
Set to MAX 0.69 bar (10 psi) Gauge Kit Air Cap At Gun At Regulator 50 Ft. Hose Figure 3 Compliance Air Cap and Gauge Kit Installation and Use 1601056-05 © 2021 Nordson Corporation... -
Page 14: Maximum Inlet Air Pressure For Lvlp Compliance
NOTE: Use only properly sized tools designed for nozzle cleaning to clean the nozzle orifice. Contact your Nordson representative for nozzle cleaning kits. Lubrication See Figure 4. The trigger pin (18), valve pin (12B), and paint needle (6) should be lubricated with silicone-free oil daily. -
Page 15: Troubleshooting
Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation. If you need help to solve a problem with your spray gun, contact your Nordson representative or call the Industrial Coating Systems Customer Support Center at (800) 433−9319. -
Page 16: Repair
4. Install the pressure spring (7) over the needle and fully into the gun. 5. Thread the material adjustment screw (9) and lock nut (8) into the gun. 6. Before putting the gun back into production, adjust the material flow, then tighten the lock nut (8). 1601056-05 © 2021 Nordson Corporation... -
Page 17: Replacing The Needle Seal
7. Install the trigger and the pressure spring, material adjustment screw, and lock nut as described previously. Adjust material flow before putting the gun back into production. 1601056-05 © 2021 Nordson Corporation... -
Page 18: Parts
GP Air Spray and LVLP Gravity Fed Manual Spray Guns ® Parts To order parts, call the Nordson Finishing Customer Support Center at (800) 433-9319 or contact your local Nordson representative. For customers outside the USA, refer to the list of Nordson Global Locations at www.nordson.com. - Page 19 GP Air Spray and LVLP Gravity Fed Manual Spray Guns ® Item Part Description Quantity Note − 1600766 Gun, manual, NES, Trilogy GP-AS − 1600768 Gun, manual, NES, Trilogy LVLP AS −−−−−− • Retainer, with seal, air cap −−−−−− • Air cap −−−−−−...
-
Page 20: Options
Kit, nozzle, 2.5 mm, LVLP, Trilogy NES 1618306 Kit, nozzle, 3.0 mm, LVLP, Trilogy NES Service Kits 1600861 Kit, seal, AS and LVLP, Trilogy NES 1600860 Kit, repair, AS and LVLP, Trilogy NES 1617888 Kit, pin, Trilogy NES 1601056-05 © 2021 Nordson Corporation... - Page 21 ___________________ Date: 29Sept20 Hallie Smith - Petee Engineering Manager Industrial Coating Systems Amherst, Ohio, USA Nordson Authorized Representative in the EU Person authorized to compile the relevant technical documentation. Contact: Operations Manager Industrial Coating Systems Nordson Deutschland GmbH Heinrich-Hertz-StraBe 42-44 D-40699 Erkrath Nordson Corporation •...
Need help?
Do you have a question about the Trilogy GP and is the answer not in the manual?
Questions and answers