Download Print this page
Henny Penny McDonald's LOV 100 Series Manual

Henny Penny McDonald's LOV 100 Series Manual

Hide thumbs Also See for McDonald's LOV 100 Series:

Advertisement

Available languages

Available languages

Quick Links

McDonald's Alert Guide
FILTER ERROR "IS POT FILLED"
= During the AIF procedure, the display may show
"IS POT FILLED? If the vat is full, press the √ button to resume normal operation.
If the vat is not full, press the X button for "NO" and the display then shows
"FILL POT FROM DRN PAN". Follow the prompts.
Note: To avoid getting this message make sure filter pan is cleaned at least daily,
filter pad is changed, make sure JIB is full and that "O" rings are in good condition.
"CHECK PAN"
= Filter pan is not locked in place.
"CHANGE FILTER PAD"
= Filter pad has not been changed within 25 hour time
period.
ELECTRIC FRYERS ONLY! "E-31" HEATING ELEMENTS ARE UP
= Heating elements
have been left up during maintenance filter. Lower heating elements.
ELECTRIC FRYERS. "E-10" HI LIMIT TRIPPED
= Allow heating elements to cool and
reset the high limit by using a small screwdriver or Allen wrench and gently push it
into the hole in the heating element hinge; if high limit does not reset call for
service. See ELECTRIC FRYERS photo below.
GAS FRYERS. "E-10" HI LIMIT TRIPPED
= Allow fryer to cool and
reset the high by
pressing
the red reset button under the right side of the
controls; if high limit does
not reset call for service. See GAS FRYERS photo below.
ELECTRIC FRYERS
GAS FRYERS
GAS FRYERS ONLY! E-20" "NO DRAFT" "CHECK
HOOD"
=
Check the fryer flue and
hood system for obstructions; have the vacuum switch checked
FRYER ON BUT NOT HEATING
= Vat unplugged or circuit breaker off
Henny Penny Technical Support Hotline:
1-800-417-8405
or 937-456-8405
1/23/08
FM07-228-A

Advertisement

loading

Summary of Contents for Henny Penny McDonald's LOV 100 Series

  • Page 1 GAS FRYERS ONLY! E-20” “NO DRAFT” “CHECK HOOD” Check the fryer flue and hood system for obstructions; have the vacuum switch checked FRYER ON BUT NOT HEATING = Vat unplugged or circuit breaker off Henny Penny Technical Support Hotline: 1-800-417-8405 or 937-456-8405 1/23/08 FM07-228-A...
  • Page 2 LA FREIDORA ESTA ENCENDIDA PERO NO CALIENTA = La freidora esta desconectada o el breaker esta disparado. Linea de soporte técnico de Henny Penny: 1-800-417-8405 or 937-456-8405 1/23/08 Spanish - FM07-228-A...
  • Page 3 Adding a New Product to the Menu 1. Press and hold buttons until LEVEL - 1 shows in the display, followed by ENTER CODE. 2. Enter code 1, 2, 3, 4. “PRODUCT” and “SELECTN” show in the displays. 3. Press √ √ √ √ √ button and ‘SELECT PRODUCT’ and “-P 1-” show in the displays. buttons scrolls through the 40 products, or press the desired product button 5.
  • Page 4 Cómo añadir un nuevo producto al menú 1. Oprima sin soltar los botones hasta que se muestre LEVEL - 1 (Nivel - 1) en la pantalla, seguido de ENTER CODE (Introduzca el código). 2. Introduzca el código 1, 2, 3, 4. Se mostrará “PRODUCT” (Producto) y “SELECTN” (Selección) en las pantallas. 3.
  • Page 5: Maintenance Filter

    14. Once full, display shows IS POT FILLED?, and YES NO. Press √ √ √ √ √ and fryer returns to normal operation. The filter pad or paper must be replaced daily! Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions. Read and understand the complete operater’s manual supplied with each unit.
  • Page 6 √ . La freidora volverá a la operación normal. ¡La almohadilla o el papel de fi ltración deben reemplazarse a diario! En caso de problemas, consulte el manual o póngase en contacto con Henny Penny Corp. llamando al 1-800-417-8405 o al 937-456-8405.
  • Page 7 JIB. to add oil to the JIB Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions. Read and understand the complete operater’s manual supplied with each unit.
  • Page 8 JIB. Reemplace el JIB. En caso de problemas, consulte el manual o póngase en contacto con Henny Penny Corp. llamando al 1-800-417-8405 o al 937-456-8405. Estas instrucciones deben usarse como guía. No son instrucciones de operación completas.
  • Page 9 4. Once fryer completes the washing and filling modes, controls return to normal operation. Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions. Read and understand the complete operater’s manual supplied with each unit.
  • Page 10 Una vez que la freidora complete las modalidades de lavado y llenado, los controles volverán a la operación normal. En caso de problemas, consulte el manual o póngase en contacto con Henny Penny Corp. llamando al 1-800-417-8405 o al 937-456-8405.