StarTech.com 4PCIE-PCIE-ENCLOSURE Quick Start Manual

PCIe 2.0 to 4 PCIe Slots Expansion Chassis - USB Type-C
Product Diagram (4PCIE-PCIE-ENCLOSURE)
PCIe Expansion Chassis
1
2
3
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
7
5
9
8
6
4
*Product may vary from image
Port/LED/
Connector
• Install up to Four PCIe cards
• PCIe version 2.0 x1 slots
PCIe Expansion
1
Slots
• 10 Gbps aggregate host bandwidth
• Full length cards supported
• (Optional) Allows for a permanent installation of the PCIe
Mounting
2
Brackets
• Mounting Holes at the Front and Back of the PCIe
• Turns the Expansion Chassis On or Off
• The correct sequence to power the device:
3 On/Off Switch
• Connect the PCIe Expansion Chassis to a Power Source
4 DC Power Port
• Recommended 12 V and 3 A. Supports 12 to 24 V input
2
• Used to connect the PCIe Expansion Chassis to a Host
• If the USB Type-C Cable is disconnected during use,
USB Type-C
5
Connector
• For a secure and correct cable connection, threaded
• Indicates if the included USB Type-C-Cable is on the
USB Type-C LED
6
Indicator
• Indicates if the On/Off Switch is turned On or Off
Power LED
7
• Solid Red = On
Indicator
• Off = Off
• Connect the PCIe Expansion Chassis to a DC Power
Terminal Block
8
Connector
• Recommended 12 V and 3 A. Supports 12 to 24 V input
9 • Remove the Metal Cover to install the PCIe cards
Metal Cover
Function
Expansion Chassis to a flat and stable surface
Expansion Chassis secure the Mounting Brackets
• Power on: Power On the PCIe Expansion Chassis
first, then the Host Computer
• Power off: Power Off the Host Computer first, then
the PCIe Expansion Chassis
using the included Power Adapter
Computer
the Host Computer must be restarted to reestablish the
connection
holes around the USB Type-C Connector allow to
Screw-lock the included USB Type-C Cable
correct orientation. The cable is not reversible
• Solid Green = Correct orientation
Source
Quick-Start Guide
Manual Revision: November 22, 2022