Page 1
DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.com Manual Revision: 02/18/2020...
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
(not included), and to Hard Drives or Solid State Drives through a Hard Drive docking station or USB enclosure, making this USB flash drive duplicator an extremely versatile solution. The USBDUP12 is backed by a StarTech.com 2-year warranty and free lifetime technical support. Packaging Contents •...
How to Use Menu Options 1. Copy 2. Compare 3. Copy + Compare 4. Capacity Check 5. Information 5.1 USB Info 5.2 System Info 6. Utility 6.1 Format 6.1.1 Auto Format 6.1.2 FAT Format 6.1.3 FAT32 Format 6.2 Measure Speed 6.3 Media Check 6.3.1 H3 Sake 100% 6.3.2 H5 RW 100%...
Page 8
Menu Options (Continued) 7. Setup 7.1 Start-up Menu 7.2 Copy Area 7.2.1 System and Files 7.2.2 Whole Media 7.3 Button Beep 7.4 Asynchronous Hold Time 7.5 Target Tolerance 7.6 Asynchronous Mode 7.7 Check Before Copy 7.8 Power Off Time Between Copy + Compare 7.9 Language 7.10 Working Mode...
1. Copy There are two types of copy modes, Asynchronous Copy and Synchronous Copy. The system will check the content size of the source before executing the ‘copy’ function. If the source content size is less than the system’s buffer memory, it will automatically start an Asynchronous copy.
NOTE: a. When the copy is in progress, the green LED will flash for each Flash drive that is connected. When the copy has finished, the green LED will stop flashing and remain illuminated. If an error occurs, the red LED will illuminate. b.
NOTE: a. When the copy is in progress, the green LED will flash for each Flash drive that is connected. When the copy has finished, the green LED will stop flashing and remain illuminated. If an error occurs, the red LED will illuminate. b.
[#3] SIZE: 1847M [#2] SIZE: 1847M Wrong Size: 752M Capacity 0K Green Light: Correct Size Red Light: Wrong Size NOTE: a. This function may change the data and format on the Flash drive. b. To protect the source drive’s data, the system does not check the capacity of the source drive.
6. Utility 6.1 Do Format 6.1.1 Auto Format Insert a Flash drive device into one of the destination slots and press OK to begin formatting. 1. This function will automatically detect the capacity of the Flash drive and format accordingly. If the Flash drive is already FAT16 or FAT32, the original format will not be changed.
6.3 Media Check Analyze the Flash drive’s quality. There are two types of methods to check the drive, ‘H3 Safe’ and ‘H5 R/W’ . Before starting a quality check, you can change the range and error limit using functions ‘6.3.3 Setup Range’ and ‘6.3.4 Set Error Limit’ respectively. 6.3.1 H3 Safe 100% Check the Flash drive’s quality by reading the drive.
6.5 Full Erase Erase the Flash drive’s content and format. 6.6 DoD Erase This function complies with the U.S.A Department of Defense (DoD 5220) standard to fully erase the Flash drive three times to guarantee the data has been deleted. NOTE: The source drive will not be formatted.
7.3 Button Beep Turn audio feedback ON/OFF. ON by default. 7.4 Asyn Hold time Set the time to cancel an Asynchronous copy when you’ve temporarily finished copying and all of the Flash drive devices have been removed, but the copy job has not been manually cancelled.
7.10 Working Mode There are 5 duplication speeds: • Slowest Mode • Slower Mode • Normal Mode (default setting) • Faster Mode • Fastest Mode Change the duplication speed. Normal speed is recommended for most Flash drive types. If there is a high failure rate when duplicating, try lowering the speed. 7.11 Set HDD Mode Choose ‘Active Mode’...
Specifications Number of Ports 3 (1 x Source, 2 x destination) External Connectors 3 x USB 2.0 type A female Duplication Rate Up to 1.5GB/m Media Supported 3.0/2.0/1.1 flash drives Internal Memory 64MB Display LCD Monochrome display Controls 4 push buttons (Up, Down, OK, Esc) 3 x Green (Activity/Successful Copy) LEDs 3 x Red (Error)
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 20
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the 8STUSBDUP12 and is the answer not in the manual?
Questions and answers