Installation 1. Connect a network cable to the PoE port on the injector and the other end to the Ubiquiti device you want to power (see device specifications). 2. Connect a network cable to the LAN port of the injector and the other end to the router or switch de su red local.
Page 3
Model POE-50-60W, POE-50-60W-WH 101 x 60 x 33 mm Dimensions (3,98 x 2,36 x 1,30”) Weight 192 g (6.77 ounces) output voltage 50 V CC a 1,2 A LAN activity Indicator Puerto LAN Gigabit remote reset Ability reset button...
safety instructions 1. Read, follow and save these instructions. 2. Pay attention to all warnings. 3. Only use the devices or accessories indicated by the manufacturer. electrical safety information 1. It is mandatory to comply with the current, frequency and voltage requirements indicated on the manufacturer's label.
limited warranty ui.com/support/warranty The limited warranty requires arbitration to resolve disputes on a case-by-case basis and, where appropriate, specifying arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the POE-50-60W and is the answer not in the manual?
Questions and answers