Temperature Probe - Cafe C2Y366 Owner's Manual

Using the Range
OVEN MODES (Cont.)

Temperature Probe

Bake, Convection Bake and Convection Roast
WARNING
Consuming undercooked food can result in foodborne illness. Use temperature probe
according to the following instructions to ensure all portions of the food reach minimum safe cooking
temperatures. Recommendations for minimum safe food temperatures can be found at foodsafety.gov or
IsItDoneYet.gov.
CAUTION
removing the temperature probe from the hot oven. Areas
around the temperature probe inlet can be very hot.
Internal food temperature is frequently used as an
indicator of doneness, especially for roasts and poultry.
The Probe mode monitors the internal food temperature
and turns the oven off when the internal food
temperature reaches the programmed temperature.
Always check the temperature at multiple locations in
the food with a food thermometer after cooking to ensure
that all portions of the food have reached the minimum
safe internal temperature for that food.
The temperature probe can be used with the BAKE,
CONV BAKE and CONV ROAST modes.
How to Set the Oven for Temperature Probe
1. Push the tip of the temperature probe into the thickest
part of the meat.
2. Place the rack in the desired rack position.
3. Set the oven controls. Turn the
Oven Mode Selector to CONV
BAKE, CONV ROAST or BAKE.
Turn the Oven Temperature Knob
to desired oven temperature in
25°F increments, from 175°F to
550°F. Allow the oven to preheat if
necessary.
26
OVEN LIGHT
Oven Mode
Selector
(Outer)
Oven
Temperature
Knob (Inner)
Insert the plug into the outlet. Make sure it is pushed
all the way in. Close the oven door.
5. Turn the Mini Knob to find the desired internal food
temperature. Push the Mini Knob to select that
temperature.
The words SET PROBE will flash in the display until a
temperature is selected. If no temperature is set, the
temperature probe will default to 100°F.
The internal food temperature can be set from a
minimum of 100°F and up to 200°F maximum.
6. When food reaches the set internal temperature, the
display will beep and the oven will turn off. To stop the
reminder beep, turn the Oven Mode Selector and the
remove the temperature probe from the oven outlet.
To change the set internal temperature anytime in the
cooking process, push the Mini Knob and turn to adjust
the temperature. Press the Mini Knob to select.
Temperature
Probe
Connector
Mini Knob
PUSH TO
SELECT
Oven
START/OFF
Temperature
Probe
Connector
49-2000660 Rev. 3