Advertisement
The PIN CODE is required to use this function.
-
press ESC to quit
-
press ENTER to continue
The display will show:
-
Enter the PIN CODE
-
press ESC to quit;
-
press ENTER to continue.
The display will show:
At the end of the operation the display will show:
-
Press a key to quit.
NOTE: this function can be used to start the car with an emergency start. Enter the PIN CODE
and read the number of keys, at the end of the operation the car can be started once, excluding
the immobilizer function (using a key without transponder or with disabled transponder).
If a wrong PIN has been entered or there are errors during communication, the display will
show: error message No. 1 (see Operating Manual chap. 10 – WARNING/ERROR
MESSAGES).
1.4
READING IMMO ID
This function is used to view the immobilizer identification (ID IMMO), a code comprising 14
alphanumerical characters, essential for finding the PIN CODE; In such cases the PIN CODE is
issued by the car manufacturer.
- MEM.KEYS NUMBER -
If you don't have
PIN CODE you don't
codify any key
- DATES INSERTION -
PIN CODE
: XXXX
PIN
: XXXX
CONNECTING ...
# # # # # # # # # #
Keys number in
memory:
Y
Press any key...
9
Advertisement
