Advertisement
SELECTING THE CAR MAKE
In this case SDD/SBB is able to automatically recognize the various central units connected and
therefore uses the right communication procedure. Simply identify:
-
CAR MODEL
-
YEAR OF MANUFACTURE
-
Use the
-
Press ESC to quit.
FUNCTIONS MENU
This section allows the functions to be carried out, in particular to:
-
programme new keys in the immobilizer also when all the original keys are missing;
-
erase the code for a missing key from the immobilizer memory;
-
check how many keys are stored in the immobilizer memory;
-
view the immobilizer ID (ID IMMO);
-
erase any errors in the immobilizer memory.
ATTENTION:
the programming system for the VAG
takes place all the keys that will be used on the given car must be memorized again. It is
therefore not possible to add/erase a single key individually.
If the wrong PIN CODE is entered 3 times consecutively, the immobilizer unit will
To release it, leave the key in the ON position (from 30 minutes to 24 hours, according to
the vehicle).
The following is the structure of the VAG
-
Select and press ENTER.
1.2
PROGRAMMING NEW KEYS
This function can be used to add keys to the immobilizer or erase them.
-
To activate the function select " PROG. NEW KEYS " and press ENTER.
The display will show:
The PIN CODE is required (secret number with 4 digits).
- VOLKSWAGEN -
BORA
CADDY
CADDY
GOLF
>
GOLF
GOLF CABRIO (95-99)
arrow keys to select the make, then press ENTER.
®
group is structured so that every time programming
®
function menu:
- VOLKSWAGEN -
> PROG.NEW KEYS
MEM.KEYS NUMBER
IMMO ID READING
PRESENT ERRORS
ERRORS RESET
- PROG. NEW KEYS -
If you don't have
PIN CODE
you don't codify
any key
(98-
)
(95-99)
(00-
)
(95-99)
(00-
)
block.
5
Advertisement
