Generac Power Systems PWRgenerator 9 kW Owner's Manual page 2

Air-cooled generator
Hide thumbs Also See for PWRgenerator 9 kW:
Table of Contents

Advertisement

Use this page to record important information about this generator.
Model:
Serial:
Production Date:
Volts:
400VDC
Amps:
22.5A
DC Output:
Engine Speed:
2,300 rpm
Controller P/N:
STA MAC ID:
SSID:
ii
Record the information found on the unit data label on this
page. See
data label. The unit has a label plate affixed to the inside par-
tition, to the left of the control panel console as shown in
ure
lid and remove the front panel.
Always supply the complete model and serial numbers of the
unit when contacting an Independent Authorized Service
Dealer (IASD) about parts and service.
Operation and Maintenance: Correct maintenance and
care of the unit ensures a minimum number of problems, and
keeps operating expenses at a minimum. It is the operator's
responsibility to perform all safety inspections, to verify all
maintenance for safe operation is performed promptly, and
to have the equipment inspected periodically by an IASD.
Normal maintenance, service, and replacement of parts are
the responsibility of the owner/operator and are not
considered defects in materials or workmanship within the
terms of the warranty. Individual operating habits and usage
may contribute to the need for additional maintenance or
service.
When the generator requires servicing or repairs, Generac
recommends contacting an IASD for assistance. Authorized
service technicians are factory-trained and are capable of
handling all service needs. To locate the nearest IASD,
please visit the dealer locator at:
www.generac.com/Dealer-Locator.
WARNING
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov.
General Information
2-1. See
Operation
for directions on how to open the top
(000393a)
Owner's Manual for PWRgenerator Air-Cooled Generators
for the location of the unit
Fig-

Advertisement

Table of Contents
loading

Table of Contents