Recommended Installation Position On Rear Windshield - Pioneer VR6C-Z710DH Owner's Manual

IMPORTANT
• Always install this product in the specified installation position to ensure a clear view of the road
while driving and to achieve full performance from the product.
Pioneer is not liable for any damages due to faulty or improper installation or use of the product.
• For vehicles equipped with driver-assistance systems, there may be areas where the installation of
accessory items is prohibited. For details, please refer to the instruction manual of your vehicle.
• Installing the Dash Camera main unit or cables near the film antenna element may affect the TV
reception sensitivity.

Recommended Installation Position on Rear Windshield

When installing the 2nd camera on the inside of the rear window, installation in a vehicle and in a
position that satisfies all of the following conditions is recommended.
• A position where the lens part of the 2nd camera is within the wiping range of the wiper.
• A position where the 2nd camera faces in the horizontal direction to the rear and side to side.
• A position where the lens part of the 2nd camera and the double-sided tape do not overlap the heating wires.
• A position where the 2nd camera connection cable can be routed without unnecessary force.
1 Clean the installation area of dirt and oils using the included cleaning cloth.
Front windshield
2 Install this product.
① : Set the mounting bracket on the main unit.
② : Peel off the double-sided tape release paper from the mounting bracket.
③ : Install at the specified position of the front windshield.
Rear windshield
Heating wires
Wiping range of the rear wiper
Rear windshield
2
1
①
− 18 −
Connection cable
2nd camera
Front
Windshield
3
Firmly push
this product.