Status Display; Video Recording - Pioneer VR6C-Z710DH Owner's Manual

Status Display

The status display shows the operating status of this product.
1 2 3 4
00:00
*1 When manual event recording is performed, or vibration, sudden braking or an approaching vehicle
behind is detected in the event recording mode, and event recording has been activated, "×2" is
displayed.
*2 A red "\" is displayed when sound recording is set to off.
*3 During a Wi-Fi connection, this is displayed in green, and when Wi-Fi is disconnected, this is
displayed in white. A red "x" is displayed when Wi-Fi connection is set to off.
*4 During GPS reception, this is displayed in green, and when GPS cannot be received, this is
displayed in white. In Parking Mode, a red "x" is displayed since GPS reception is set to off.

Video Recording

Recording automatically starts when this product is started. The recorded video is saved to the
microSD card as one file of the set increment of time (default: 3 minutes), and when the microSD card
runs out of free space, the files are overwritten starting from the oldest file.
Notes
• You can change the video recording time.
→
"Product Settings" - "Configurable Features" - "Values" - "Video Recording" - "Video Clip
Length"
• Video recording will stop under the following circumstances.
— When the MENU screen is displayed
— When the power supply is stopped
— When parking mode has started
• The recording time may differ depending on the conditions.
5 6 7
1 Recording in progress
2 Elapsed recording time
3 Event recording status*1
4 Parking mode
5 Sound recording*2
6 Wi-Fi connection status*3
7 GPS reception status*4
− 29 −