Connecting The Power Cable - Pioneer VR6C-Z710DH Owner's Manual

Connecting the Power Cable

• Be sure to disconnect the ⊖ terminal of the vehicle's battery before connecting the power cable.
• The product should be installed by authorized service company personnel who have special
training and experience with mobile electronics products.
By using the power cable to draw power directly from the vehicle, this product can detect and record
vehicle movement caused by vibration even when the vehicle's engine is turned off.
→
"Product Settings" - "Configurable Features" - "Values" - "Parking Mode" - "Security Mode"
Black 0.5 m/1 ft. 8 in.
Yellow 0.5 m/1 ft. 8 in.
Fuse
(F 2 AL/250 V)
Red 0.5 m/1 ft. 8 in.
Fuse
(F 2 AL/250 V)
4.5 m/14 ft. 9 in.
Black 5 m/16 ft. 5 in.
− 22 −