Video Recording; Record Automatically - HIKVISION DS-2TD2636B-15/P User Manual

Thermal & Optical Bi-spectrum Network Camera User Manual
3. Set basic parameters.
Protocol Version
Server IP
Serve Port
AccessKey
SecretKey
User Name and
Password
Picture Storage Pool
ID
4. Click Test to test the configured settings.
5. Click Save.

8.2 Video Recording

This part introduces the operations of manual and scheduled recording, playback, and
downloading recorded files.

8.2.1 Record Automatically

This function can record video automatically during configured time periods.
Before You Start
Select Trigger Recording in event settings for each record type except Continuous. See Event and
Alarm for details.
Steps
1. Go to Configuration → Storage → Schedule Settings → Record Schedule.
2. Select channel No.
3. Check Enable.
4. Select a record type.
Note
The record type varies according to different models.
Continuous
The protocol version of the cloud video manager.
The IP address of the cloud video manager. It supports IPv4 address.
The port of the cloud video manager. You are recommended to use
the default port.
The key to log in to the cloud video manager.
The key to encrypt the data stored in the cloud video manager.
The user name and password of the cloud video manager.
The ID of the picture storage region in the cloud video manager.
Make sure storage pool ID and the storage region ID are the same.
47