Chapter 3 Smart Function; Enable Vca Function; Set Same Unit; Temperature Measurement - HIKVISION DS-2TD2636B-15/P User Manual

Thermal & Optical Bi-spectrum Network Camera User Manual

3.1 Enable VCA Function

The different VCA function corresponds to different VCA resource type. Enable the VCA resource
first to active corresponding VCA function.
Steps
1. Go to Configuration → System → Maintenance → VCA Resource Type page.
2. Select the desired VCA resource type.
Note
The VCA resource type varies according to different camera models. Please refer to the current
interface.
3. Click Save.
Note
● Some of the VCA functions are mutually exclusive. When certain VCA resource type is
selected and saved, the mutually exclusive VCA function will not display.
● A reboot is required after setting the VCA resource.

3.2 Set Same Unit

Set the same temperature unit and distance unit. When you enable this function, the unit cannot
be configured separately in other setting pages
Steps
1. Go to Configuration → System → System Settings → Unit Settings.
2. Check Use Same Unit.
3. Set the temperature unit and distance unit.
4. Click Save.

3.3 Temperature Measurement

When you enable this function, the device measures the actual temperature of the scene. It

Chapter 3 Smart Function

5