Running The Intensive Appliance Care Programme - Siemens WT47XKH1ES Installation And Operating Manual

Hide thumbs Also See for WT47XKH1ES:
Table of Contents

Advertisement

Press # to switch off the appliance.
10.
You have now completed the appliance
care programme.
Running the intensive
appliance care programme
You can run the intensive appliance
care programme to remove any
stubborn dirt deposits in the appliance
and odours after a downtime of more
than one month.
Notes
The intensive appliance care
programme runs for approximately 4
hours. The programme may take
longer if you do not carry out the
necessary steps in good time while
the programme is running.
Once it has started, the intensive
appliance care programme should
not be cancelled.
When you run the intensive
appliance care programme, you will
need to use the original appliance
care product. This can be ordered
from our after-sales service using
spare part number 00311829.
Contact information for all countries
can be found in the enclosed after-
sales service directory.
:
Warning
Risk of injury/material damage/
damage to the appliance!
The use of spare parts and accessories
supplied by other brands is dangerous
and may result in injury, material
damage or damage to the appliance.
For safety reasons, use genuine spare
parts and accessories only.
Caution!
Material damage/damage to the
appliance
If you pour the wrong quantity of
detergent or cleaning agent into the
appliance, this may result in material
damage or damage to the appliance.
Use detergents/care products/cleaning
agents and softeners in accordance
with the manufacturers' instructions.
Run the appliance care programme as
follows:
Prepare the appliance for appliance
1.
care. ~ Page 54
Set the programme to position 1.
2.
Press and hold ü tipo
3.
secado (Drying Target). At the same
time:
Appliance care
en
57

Advertisement

Table of Contents
loading

Table of Contents