Siemens WT47XKH1ES Installation And Operating Manual page 22

Hide thumbs Also See for WT47XKH1ES:
Table of Contents

Advertisement

Display
en
}
±
ð
ç
é
ÿ
'§"
•©£
--------
22
Remote Start
Energy manager
Empty the condensa-
tion container
~ Page 31
Base unit
Automatic heat
exchanger rinse
Water reservoir
Basic appliance care
programme
CoolDown
lights up: Remote start function is activated.
~ Page 25
Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)
Empty the condensation container and then rein-
sert it.~ Page 31
Then press inicio pausa+carga ‹ (Start/Pause).
Clean the filter in the condensation container.
If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 46
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
Cleaning the base unit ~ Page 49
The heat exchanger is being cleaned automatically. Do
not pull out the condensation container or cancel the
programme while this is displayed.
Fill the water reservoir with cold water for the crease
removal function. ~ Page 43
Press inicio pausa+carga ‹ (Start/Pause).
Not a fault. After a certain period, the appliance will
automatically recommend that you run the basic appli-
ance care programme. Run the basic appliance care
programme. ~ Page 55
The appliance can reach high temperatures when dry-
ing. The CoolDown process reduces the temperature to
prevent damage to the laundry when you:
Pause the programme
Cancel the programme
Switch off the appliance via the app
The CoolDown process does not start until 30 seconds
after pausing/cancelling the programme or switching
off the appliance via the app. You can continue to oper-
ate the appliance during the CoolDown process.
Notes
The drum continues to rotate during the CoolDown
process, even if you have paused the programme.
Do not change the programme during the
CoolDown process.
Temperature regulation can take up to 10 minutes.

Advertisement

Table of Contents
loading

Table of Contents