Table of Contents
Advertisement
Appliance care
en
Run the appliance care programme as
follows:
Prepare the appliance for appliance
1.
care. ~ Page 54
Set the programme to position 1.
2.
Press and hold ü tipo
3.
secado (Drying Target). At the same
time:
Set the programme to position 4.
4.
'˜‚ and the programme duration will
now alternate on the display.
Pour approx. 1 ^ litre of warm tap
5.
water into the condensation
container.
Hold the full condensation
Note:
container horizontally at all times so
that no liquid spills out.
56
Slide in the condensation container
6.
until it clicks into place.
Press inicio pausa+carga ‹ (Start/
7.
Pause).
The appliance care programme will start
and an audible signal will sound.
"Ÿš will appear on the display once the
appliance care programme has ended
and an audible signal will sound.
Pull out the condensation container
8.
horizontally and empty it.
Slide in the condensation container
9.
until it clicks into place.
Advertisement
Table of Contents
