Related Manuals for Siemens WT47XM40
Summary of Contents for Siemens WT47XM40
- Page 1 Clothes dryer WT47XM40 siemens-home.bsh-group.com/welcome register your product on-line...
- Page 2 Caution! In order to meet the high quality standards of the Siemens brand, every This signal word indicates a possibly tumble dryer that leaves our factory has dangerous situation. Failure to observe...
-
Page 3: Table Of Contents
Table of Contents enUsing and installation instructions Cancel the program... .28 End of Intended program....28 Use. -
Page 4: Use
Intended Use Intended Device help... . . 48 ßer use Transporting the device..51 This device is intended exclusively for Consumption values... . 52 ■... -
Page 5: Safety Instructions
safety instructions Do not allow children to safety instructions ■ carry out cleaning or maintenance work on this The following safety instructions and device without supervision. Sure hi tshi nwei se Keep children under the warnings are intended to protect you and those ■... -
Page 6: Installation
safety instructions warning The device must not be ■ supplied via an external Risk of poisoning! switching device, such as a Detergents and care timer, or connected to a products can cause circuit. poisoning when consumed. which is regularly switched If accidentally swallowed, seek on and off by the energy medical advice. - Page 7 safety instructions warning warning Risk of electric shock / risk of fire / Risk of injury / damage to damage to property and property and equipment! The device can vibrate or equipment! ■ Modifying or damaging the move during operation and power cord of the device can cause injury or property lead to electric shock, short...
-
Page 8: Operation
safety instructions warning Do not use the appliance if ■ industrial chemicals have Risk of injury! been used to clean the You could injure yourself ■ laundry. when lifting the device due to the heavy weight. Do not warning lift the device alone. Risk of explosion and fire! Residues in the fluff filter you could cut your... - Page 9 safety instructions warning warning Risk of poisoning! Fire hazard / property and Cleaning agents that contain equipment damage! solvents, such as benzine, can Aborting the program before the produce poisonous fumes. end of the drying cycle prevents the laundry from cooling down Do not use cleaning agents sufficiently and can cause the that contain solvents.
-
Page 10: Cleaning / Maintenance
safety instructions Caution! Incorrect dosing of detergents ■ and cleaning agents can lead to Property and equipment damage damage to property and Exceeding the maximum ■ equipment. load Use detergents, care products, Impairs the function of the cleaning agents and fabric device or leads to property softeners according to the and device damage. - Page 11 safety instructions The device and the warning ■ properties of the device Risk of injury / damage to must not be technically property and equipment! changed. The use of non-original spare Repairs and interventions parts and accessories is ■ or a change of the power line (if dangerous and can lead to necessary) may only be carried injuries as well as property and...
-
Page 12: Savings Tips
Savings tips Savings tips Set up the device and connect Spin the laundry before drying. Drier ■ Save money laundry shortens the program scope of delivery duration and lowers energy Set up and connect the device consumption. Load the device with the maximum ■... - Page 13 Set up and connect the device Pull out the power plug from disused Incorrect installation (stacking) of this ■ ■ devices and cut through them device on a washing machine can lead thereafter the power cable and to injuries as well as property and destroy the lock on the appliance door.
-
Page 14: Connecting The Device
Set up and connect the device Caution! The mains voltage at your socket outlet ■ and the voltage information on the Property and equipment damage device (device label) must match. The The device was subjected to a function connection values and the required test before it left the factory and may fuse are specified on the rating plate. -
Page 15: Before Using For The First Time
Set up and connect the device warning A notice: After it has been properly installed and connected, the device is ready Risk of fire / damage to property and for operation. No further action is equipment! necessary. The use of extension cables or multiple sockets can lead to fire due to Optional accessories overheating or short circuits. -
Page 16: Quick Start Guide
quick start Guide quick start Guide A notice: The device must be set up and connected properly. Quick start Guide ~ page 12 In front Program start: Sort laundry. Select program. Turn on a device. - - - - - - - - Start the program. -
Page 17: Get To Know The Device
Get to know the device Get to know the device Device overview Get to know the device ( Condensation container ~ Page 28 0 cover 8th Drum interior lighting (depending on the equipment) @ Air inlet H Maintenance flap of the base unit ~ Page 38 P. -
Page 18: Display
Display cover Programs Program selector Turn: set the program ■ Press: Switch device on / off ■ Display Display of settings and information Keys for program settings and additional functions / device settings Display Di spl ay 18th... - Page 19 Display description information advertisement Program status: shines: Status display Iron dry » Cupboard dry Ý Anti-crease -˜- Break “Ÿš End of program Dry target Dry target O cupboard dry plus activates the » dryness level » Cupboard dry activates the dryness levelOiron dry activated Degree of dryness activated for a dryness target Degree of dryness...
- Page 20 Display ð Empty and insert the condensation Condensate container ■ empty ter container. ~ Page 28 ~ Page 28 Then press Start / Reload. Clean the sieve in the condensation container. ■ If the optional drain hose * is installed, ■...
-
Page 21: Program Overview
Program overview Program overview program Program overview maximum load Program name maximum load dung based on Brief explanation of the program and for which textiles it is suitable. the dry weight of the textiles 8 kg cotton Hard-wearing textiles, heat-resistant textiles made of cotton or linen. Easy-care 3.5 kg Textiles made from synthetic or blended fabrics. - Page 22 Program overview Shirts / Business 1.5 kg Shirts / blouses made of cotton, linen, synthetic or blended fabrics. A notice: After drying, iron the laundry or hang it up. Residual moisture is then distributed evenly. Quilts 2.5 kg Textiles filled with synthetic fibers, pillows, quilts or bedspreads. A notice: Dry large parts individually.
-
Page 23: Settings
Program overview settings function Program entry position A notice: Some settings cannot be activated in all programs. The activated settings are shown on the buttons or highlighted in the display. You can change or deactivate activated settings by repeatedly pressing the corresponding buttons. with Remote start}you can enable the appliance for remote start via the Home Remote start} Connect app or call up the Home Connect settings. - Page 24 Program overview The drying time forûTime programs can with M.andN can be extended in 10- M. Completed inN minute steps. M / N With the selection buttonsM.andNyou can adjust setting values. The drum moves the laundry at regular intervals after drying to Anti-crease 60 Min.
-
Page 25: Laundry
Laundry Some detergents and care products ■ Laundry Eg laundry starch or fabric softener contain particles that can be deposited Prepare laundry on the moisture sensor. This can Laundry impair the function of the sensor and warning thus the drying result. Risk of explosion and fire! Some objects could ignite when drying and Hints... -
Page 26: Operate The Device
Operate the device Follow the drying program ■ Operate the device description of the textile. Switch on the appliance and load the laundry ~ " Program overview " Operate the device on page 21 A notice: The device must be set up and connected properly. -
Page 27: Set The Program
Operate the device Close the door. The program settings appear in the display. Adjust the program settings, if desired. Start the program on Start / reload to press. A notice: If you want to secure the program against inadvertent adjustment, Caution! activate the child lock. -
Page 28: Cancel The Program
Operate the device A notice: Do not change the program Press # to switch off the device. during CoolDown. Close the door. on Start / reload to press. A notice: The program duration in the display is updated depending on the load and residual moisture in the laundry. -
Page 29: Device Settings
Device settings Pour out condensed water. Device settings You can adjust or activate / deactivate the Device settings child lock and general settings (e.g. signals). Parental controls By activating the child lock, you prevent accidental use of the panel. Caution! Health and property damage Activate / deactivate child lock: possible... - Page 30 Device settings Set the program to position (. The basic settings are assigned to the following program positions: Basic setting position on üDry target press and at the same time: Adjust the volume of the information Program on position0to adjust. signals (e.g.
-
Page 31: Home Connect
Home Connect Hints Home Connect Please note the safety information in ■ these instructions for use and ensure that you adhere to them even if you This device is Wi-Fi capable and can be remotely controlled via a mobile device. HomeConnect operate the device via the Home Connect app and are not at home. - Page 32 Home Connect If your home network router does Manual connection to the home ■ not have a WPS function, you will network have to manually connect your Step 2.2 device to your home network. Make sure that you are in the Home You then need to connect to the Home Connect menu.
-
Page 33: Activate / Deactivate Wi-Fi
Home Connect Mobile device with the WLAN network Make sure that you are in the Home HomeConnect connect and WiFi Connect menu. ~ Page 31 password (key) Home Connect enter. Make sure that you have opened the Home Your mobile device will now connect Connect app and are logged in. -
Page 34: Network Settings
Home Connect Set the program to position 4. Set the program to position 5. The display shows: '© Ÿ (Wi-Fi The display shows: § “à (Reset network function). settings). on Start / reload to press. on Start / reload to press. The display shows: ¢... -
Page 35: Energy Management
Home Connect The display shows: ¢ “à. Your device is now trying to connect to Start / reload to press. the Smart Energy System (energy manager). If the device has successfully A notice: Updating the software can connected, take several minutes. Do not turn off appears in the display: ™... -
Page 36: Intelligent Program Recommendation
Home Connect Hints The expected program duration of the recommended program is determined on If the Smart Energy system (energy ■ the basis of your previous washing manager) does not start your device, program. the program will still be started before the set time has elapsed. -
Page 37: Remote Diagnosis
A detailed RED declaration of conformity Support area of the Home Connect can be found on the Internet at website in your country: www.home- www.siemens-home.bsh-group.com on connect.com the product page of your device with the additional documents. Note on data protection... -
Page 38: Clean And Maintain
Clean and maintain Caution! Clean and maintain Property and equipment damage Detergents and agents for the pretreatment to clean a device of laundry (eg stain removers, pre-wash Wait a minute sprays, ...) can damage the surface of the warning appliance if they come into contact with Risk of death! them. - Page 39 Clean and maintain Clean the base unit as follows: Remove all lint from the heat exchanger cover and the lint filter. Open the maintenance flap on the handle. A notice: Make sure that no dirt Unlock the lever on the heat remains on the seals of the heat exchanger cover.
- Page 40 Clean and maintain Pull out the fluff container - You can also clean the lint horizontally. container in the dishwasher. - Make sure to dry the filter of the lint container thoroughly after rinsing Close the fluff container. A notice: The lint container may contain damp lint and residual water and drip when it is pulled out.
-
Page 41: Cleaning The Moisture Sensor
Clean and maintain 12thLock the lever on the heat Open door. exchanger cover. Clean the moisture sensor with a roughened sponge. 13thClose the maintenance flap. Caution! You have cleaned the bottom unit of the The humidity sensor can be damaged. device. -
Page 42: Device Care
Device care Horizontal condensate container Ö Device care pull right out. The device offers additional cleaning programs Equipment care that you can run to take care of the device: With the simple device care you can ■ remove possible light dirt deposits in the device. -
Page 43: Carry Out
Device care Carry out simple device Prepare the device for device care as follows: maintenance Clean the base unit. ~ Page 38 You can carry out the simple device care Open door. procedure in order to remove possible Remove laundry. light dirt deposits in the device. -
Page 44: Carry Out
Device care Fill approx. 1 ^ liter of warm tap water Push in the condensation container into the condensation container. until it clicks into place. A notice: Always hold the filled 10.Press # to switch off the device. condensation container horizontally so that no liquid leaks out. - Page 45 Device care For intensive device care you need the Set the program to position 4. ■ original care product that you can find under the Spare part number: 00311829 can order from customer service. You will find the contact details for all countries in the enclosed customer service directory.
- Page 46 Device care 8th. Push in the condensation 12thCarefully swivel the condensate container until it clicks into place. container horizontally and empty it to rinse out any residues of the original care product. on Start / reload to press. Device care starts and a signal sounds. 13thFill approx.
- Page 47 Device care 17thPush in the condensation container until it clicks into place. 18thPress # to switch off the device. You have carried out device maintenance.
-
Page 48: Device Help
Device help Device help Disruptions Hi l to the device Cause / remedy Check the power plug and the fuses. Device does not start A dirty or damp fluff filter can impair the airflow in the The device does not respond to ■... - Page 49 Device help Laundry does not dry At the end of the program, warm laundry feels more humid than it ■ properly or is still too damp. actually is. Spread out the laundry and let it cool down. Adjust the dryness level or increase the level of dryness. This extends the drying ■...
- Page 50 Device help Drying program If the drying program is interrupted due to a power failure, start canceled. the program again or remove the laundry and spread it out. Wi-Fi is turned off. To connect to the home network, Connection to the home ■...
-
Page 51: Transporting The Device
Transporting the device Push the condensation container Transporting the device back into the device until you feel it click into place. warning Transport of the device: Risk of injury / damage to property and equipment! If the appliance is lifted or pushed using protruding components (eg appliance door), the components can break off and cause injuries. -
Page 52: Consumption Values
Consumption values Consumption values Consumption value table Consumption values The speed at which the laundry is spun Power consumption** Duration** program (in min) (in kWh) became (in rpm) 8 kg 4 kg 8 kg 4 kg cotton 1400 1.22 0.72 Cupboard dry »* 1000 1.44... -
Page 53: Technical Specifications
Technical specifications disposal Technical specifications Dimensions: Technical specifications disposal Dispose of packaging and device in an 850 x 600 x 640 mm environmentally friendly manner. (height x width x depth) This appliance is labeled in accordance with European Weight: Directive 2012/19 / EU on old 56 kg (depending on the model) electrical and electronic Mains connection:... -
Page 54: Customer Service
Customer service Customer service If you cannot rectify a fault yourself by Customer service switching the device off and on, please contact customer service. ~ Enclosed customer service list or Back cover We always find a suitable solution, also to avoid unnecessary visits by technicians. - Page 56 089 21 751 751 0810 550 522 0848 840 040 The contact details for all countries can be found in the enclosed customer service directory. BSH Hausgeräte GmbH Carl-Wery-Strasse 34 81739 Munich GERMANY siemens-home.bsh-group.com * 9001437062 * 9001437062 ( 9907)