ΠDraining The Condensation; Water - Siemens WT47XKH1ES Installation And Operating Manual

Hide thumbs Also See for WT47XKH1ES:
Table of Contents

Advertisement

Draining the condensation water
en
Œ
Draining the
condensation water
C ondensation will form in the appliance
D r a i n i n g t h e c o n d e n s a t i o n w a t e r
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
Remove any accessories from the
1.
drum.
Remove all items from the bag.
2.
46
Remove the cap from the socket.
3.
Notes
– The appliance is supplied with
the cap fitted on the socket.
– When removing the cap, a little
liquid may issue from the socket.
Push the cap into its "park position".
4.
Push the drain hose as far as it will
5.
go onto the uncovered socket.

Advertisement

Table of Contents
loading

Table of Contents