Cf Card Installation; Figure 8 Cf Card Insertion; Figure 9 Cf Card Insertion Detail - ABB LVS Digital Manual

D IG ITA L GAT EWAY I NSTA LLAT IO N

4.2 CF Card Installation

The Compact Flash (CF) card is required to start and run the Digital Gateway. The procedure
to create the CF card configuration and copy all mandatory files is described in the MNavi-
gate help file.
Only Industrial Grade CF cards shall be utilized to ensure correct function of the Digi-
tal Gateway in the switchgear environment!
The CF card slot is located on the Digital Gateway front side. To remove or insert the CF card
the power supply connector must be removed, and the metal cover has to be lifted. This en-
sures that CF card can only be removed/inserted while power supply is off.
CF card shall be inserted with the correct side up and with care as the card is mechanically
coded and insertion should not be forced.
The following example shows the ABB standard CF card.

Figure 8 CF Card Insertion

Figure 9 CF Card Insertion Detail

1 TG C90 80 04
CF CARD INSTALLATIO N
1 5