Advertisement
2. Remove the two bolts, 1, securing the keeper
plate, 2. One must be accessed using the access
hole, 3, in the cam gear.
3. Slide the camshaft and gear out of the camshaft
bore.
FRONT END PLATE
Removal
Remove the retaining bolts and lift the front plate off
its locating dowels. Remove the gasket and discard.
Op. 10 102
OIL SUMP
Removal
1. Remove the oil sump retainer bolts, 1.
2. Remove the oil sump and discard gasket.
3. Remove steel spacer, 2, from the block.
SECTION 10 - ENGINE - CHAPTER 1
10-29
3
2
1
2
10032653
33
34
1
35
Advertisement
