Exit Without Saving - PCchips M852 Manual

Set Password Option
This item can be used to install a password. To install a password,
follow these steps:
1. Highlight the item Set Password on the main menu and press
<Enter>.
2. The password dialog box appears.
Enter Password:
3. If you are installing a new password, type in the password. You
cannot use more than eight characters or numbers. The Set
Password item differentiates between upper and lower case
characters. Press <Enter> after you have typed in the password. If
you are deleting a password that is already installed press <Enter>
when the password dialog box appears. You see a message that
indicates that the password has been disabled.
PASSWORD DISABLED !!!
Press any key to continue . . .
4. Press any key. You are prompted to confirm the password:
Confirm Password:
5. Type the password again and press <Enter>, or press <Enter> if
you are deleting a password that is already installed.
6. If you typed the password correctly, the password will be installed.
Save & Exit Setup Option
Highlight this item and press <Enter> to save the changes that you
have made in the Setup Utility and exit the Setup Utility. When the
Save and Exit dialog box appears, press <Y> to save and exit, or press
<N> to return to the main menu:

Exit Without Saving

Highlight this item and press <Enter> to discard any changes that you
have made in the Setup Utility and exit the Setup Utility. When the
Exit Without Saving dialog box appears, press <Y> to discard changes
and exit, or press <N> to return to the main menu.
Note: If you have made settings that you do not want to save, use the "Exit
Without Saving" item and press <Y> to discard any changes you
have made.
42