Auto Configuration with Fail Safe Settings
This option opens a dialog box that lets you install fail-safe
defaults for all appropriate items in the Setup Utility:
Press <Y> and then <Enter> to install the defaults. Press <N> and
then <Enter> to not install the defaults. The fail-safe defaults place
no great demands on the system and are generally stable. If your
system is not functioning correctly, try installing the fail-safe
defaults as a first step in getting your system working properly
again. If you only want to install fail-safe defaults for a specific
option, select and display that option, and then press <F6>.
Save Settings and Exit
Highlight this item and press <Enter> to save the changes that you
have made in the Setup Utility and exit the Setup Utility. When the
Save and Exit dialog box appears, press <Y> to save and exit, or
press <N> to return to the main menu.
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that
you have made in the Setup Utility and exit the Setup Utility.
When the Exit Without Saving dialog box appears, press <Y> to
discard changes and exit, or press <N> to return to the main menu.
Note: If you have made settings that you do not want to save, use
the "Exit Without Saving" item and press <Y> to discard
any changes you have made.
This concludes Chapter 3. Refer to the next chapter for information
on the software supplied with the mainboard.
35