Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Item
Error Tone
Volume
Repeat
Sound Type
Alert Lamp Notice
Sleep Timer
Wake from Sleep
Touch LCD Screen to Wake
*
On
Off
Scheduled
Date/Time Settings
Date/Time
Daylight Saving
Time
Time Difference
User's Guide
Control Panel Menu
Parameter
Explanation
0
Sets the volume and the repetitions of sounds when an error occurs and
printing cannot continue.
1
2
*
3
Off
*
Until Stopped
*
Sets the type of sounds. Sounds that are easy to hear in the printer's
Pattern1
operating environment can be set.
Pattern2
*
Sets whether or not (On/Off) the alert lamp turns on when an error
On
notification is received.
Off
*
Sets how long before the printer enters sleep mode when no print jobs
1 to 240 (15
)
are received and no errors are detected. When the printer enters sleep
mode, the control panel's screen turns off and the internal motors and
other parts switch off to consume less power.
To reactivate the control panel display, press any button in the control
panel except P. The control panel display will however turn off again if
no operations are performed for another 30 seconds under these
conditions. The printer is only fully reactivated when a print job is
received, or when another operation involving printer hardware is
performed.
You can set how to wake the printer from sleep mode.
0:00 to 23:45
Sets the printer's built-in clock. The time set here is displayed on the
Home screen. It is also used for job logs and the printer's status as
shown in Epson Edge Dashboard.
*
Sets daylight saving time.
Off (Winter)
Winter and Summer are only displayed for the SC-F6470/ SC-F6470H.
On (Summer)
-12:45 to +13:45
Sets the time difference with coordinated universal time (UTC) in 15
minute increments. In network environments with a time difference, set
this as necessary when administrating the printer.
72
Advertisement
Table of Contents
