Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Item
Printer Setup
Margins
Right Margin
Left Margin
Margin Between Pa-
ges
Top Margin
Bottom Margin
Media Detection
Width Detection
Media Width
Detect Paper Skew
User's Guide
Control Panel Menu
Parameter
Explanation
*
Sets the width of the right margin when media is loaded in the printer.
3 to 25 mm (3
)
See the following for more information.
(0.12 to 0.98 inch
*
[0.12
])
"Printable area" on page 48
U
*
Sets the width of the left margin when media is loaded in the printer.
3 to 25 mm (3
)
See the following for more information.
(0.12 to 0.98 inch
*
[0.12
])
"Printable area" on page 48
U
*
Sets the margin between printed pages. For single-page print jobs, this
5 to 999 mm (10
)
is the margin placed between jobs.
(0.20 to 39.33 inch
*
[0.39
])
*
Sets the height of the top margin when media is loaded in the printer.
5 to 35 mm (15
)
See the following for more information.
(0.20 to 1.38 inch
*
[0.59
])
"Printable area" on page 48
U
*
Sets the height of the bottom margin when media is loaded in the
5 to 150 mm (15
)
printer. See the following for more information.
(0.20 to 5.91 inch
*
[0.59
])
"Printable area" on page 48
U
*
Select whether or not (On)/(Off) the media width is detected. Try
On
setting this to Off when printing if media width errors are displayed
even though the media is correctly loaded. However, we recommend
Off
setting this to On when using the printer. Changed settings are
reflected when the media is reloaded.
254.0 to 1117.6 mm
When Width Detection is set to Off, make sure the media width is set
*
correctly here according to the width of the media loaded. Changed
(254.0
)
settings are reflected when the media is reloaded.
(10.00 to 44.00 inch
*
[10.00
])
If the correct media width is not set, the printer may print beyond the
edges of the media. Ink used outside the edges of the media will stain
the inside of the printer.
*
Select whether the printer will stop printing and display an error (On) or
On
whether the printer will continue printing (Off) when skewed media is
detected. On is recommended in most circumstances, as skewed media
Off
may cause the printer to jam.
74
Advertisement
Table of Contents
