Table of Contents
Advertisement
SC-F6400 Series/SC-F6400H Series
Back
A
AC inlet
Connect the supplied power cable here.
B
Waste ink tube
Waste ink is discharged from this tube. Be sure the end of this tube is in the Waste Ink Bottle while the printer is
in use.
C
Stopper
The stopper prevents splatter when the waste ink is ejected.
Fit the stopper closely to the mouth of the waste ink bottle except when replacing the waste ink bottle.
D
Waste Ink Bottle
Waste ink collects in this bottle.
Replace with a new Waste Ink Bottle when the level approaches the line.
E
Casters
There are two casters on each leg. Once installation is complete, the casters should be kept locked while the
printer is in use.
User's Guide
Introduction
14
Advertisement
Table of Contents
