Block Diagram - Main Menu; Day Of The Week - Tech Controllers EU-292n v2 User Manual

EU-292n user's manual
4.1.

BLOCK DIAGRAM - MAIN MENU

Pre-set comfort temperature
Pre-set economical temperature
Pre-set temperature hysteresis
Temperature sensor calibration
Maximum floor temperature*
Minimum floor temperature*
Floor temperature hysteresis
*These functions are displayed only after the additional sensor has been connected to the floor sensor contact and
activated in the controller menu by selecting ON in the Floor sensor submenu.
4.2.

DAY OF THE WEEK

After entering the main menu, all icons which are not connected
with the parameter which is being edited are not displayed. The first
parameter is day of the week. Press
of the week is displayed.
Press MENU to confirm and move on to the next parameter or press
EXIT to confirm and return to the main screen view.
Day of the week
Clock settings
Day from...
Night from...
Button lock
Optimum start
Automatic manual mode
Weekly program
Registration
Floor sensor
Service menu
or until the current day
Heat/Cool
Edition min. pre-set temperature
Edition max. pre-set temperature
Optimum Start calibration
Factory settings
13