Weekly Program - Tech Controllers EU-292n v2 User Manual

4.9.

WEEKLY PROGRAM

This function is used to change the current weekly control program and edit the weekly programs.

HOW TO CHANGE WEEKLY PROGRAM NUMBER
When weekly control is enabled (see: VII.2. Operation modes) the current
program is activated. In order to choose the program number, press
MENU until weekly program settings appear on the screen.
By pressing and holding MENU button the user opens up the program
selection screen. Each time the user holds the MENU button, the program
number changes. When the desired number appears on the screen, press
MENU – the controller returns to the main screen view and the selected
program number is set.

HOW TO CONFIGURE PARTICULAR WEEKLY PROGRAMS
Weekly program allows the user to define the time when comfort temperature and economical temperature will apply.
Depending on the program number, the user may set daily temperature values for all days of the week (programs 1÷3),
for weekdays and the weekend separately (programs 4÷6) and for each day of the week separately (programs 7÷9).
In order to edit weekly program, press MENU until weekly program setting screen opens up.
STEP 1 – CHOOSE THE PROGRAM TO BE EDITED:
By pressing and holding MENU button the user opens up the program
editing screen. Each time the user holds the MENU button, the program
number changes. When the desired number appears on the screen, the
user may start editing its parameters.
Weekly program number
16
TECH
Weekly program number