Registration; Floor Sensor; Maximum Floor Temperature; Minimum Floor Temperature - Tech Controllers EU-292n v2 User Manual

EU-292n user's manual
4.14.

REGISTRATION

The description of the functions can be found in chapter IV. Wireless controller receiver .
4.15.

FLOOR SENSOR

Use one of the buttons
(confirm and go on to edit the next parameter) or press EXIT to confirm and return to the main screen view.
It is necessary to set this function to ON in order for the following parameters to be available in the
controller menu: maximum floor temperature, floor sensor hysteresis, minimum floor temperature.
4.16.

MAXIMUM FLOOR TEMPERATURE

In order to set the maximum floor temperature, enable floor heating and
press MENU until the maximum floor temperature screen opens up.
Next, use or to set the maximum temperature.
To confirm, press the MENU button (confirm and go on to edit the next
parameter) or press EXIT to confirm and return to the main screen view.
4.17.

MINIMUM FLOOR TEMPERATURE

In order to set the minimum floor temperature, enable floor heating and
press MENU until the minimum floor temperature screen opens up.
Next, use or to set the minimum temperature.
To confirm, press the MENU button (confirm and go on to edit the next
parameter) or press EXIT to confirm and return to the main screen view.
4.18.

FLOOR TEMPERATURE HYSTERESIS

Floor temperature hysteresis defines the pre-set temperature tolerance
in order to prevent undesired oscillation in case of small temperature
fluctuation within the range of 0,2 ÷ 4°C. In order to set the hysteresis,
press MENU until the hysteresis screen opens up. Next, use
to set the hysteresis. To confirm, press the MENU button (confirm and
go on to edit the next parameter) or press EXIT to confirm and return to
the main screen view.
Example:
Pre-set temperature: 23°C
Hysteresis: 1°C
The room regulator reports that the temperature is too low only when
the room temperature drops to 22 °C.
to enable the floor sensor (ON) or disable it (OFF). To confirm, press the MENU button
NOTE
or
19