Shoprider VIKING 3 Owner's Manual page 16

Wheels and Tires
The wheels of your scooter have one piece rims and tubeless tyres so repairing any
punctures will need to done by a authorised repairer or tyre centre. To change the wheels
remove the center 13 mm bolt and slide the wheel off its axles. Take care not to lose the
drive key on the rear wheels. When refitting the wheel ensure the drive key is inserted
correctly and tighten the 13mm bolt. Tyre pressure is recommended to be kept at 30 psi on
the rear tires and 30 psi on the front.
Caution: On the tyre it states maximum tire pressure is 36psi. This is a maximum tyre
pressure and should not be required to be this high.
Attention: Tyres should be maintained at the correct pressure noted above to ensure
even wear and ride comfort.
16