Installation; Installation Option - Installing Base Stand For Desktop - VTech Analog Next Gen Series User Manual

Installation

Installation option - installing base
stand for desktop
To mount the telephone base on the base
stand
1. Turn the telephone base over with the
bottom side facing up. Connect the coiled
handset cord to the telephone base, and
then connect the long telephone line cord
as shown below.
2. Align the grooves of the base stand with the
telephone base. Slide the base stand up to
secure it.
3. Plug the other end of the telephone line
cord to the telephone wall jack.
4. Place the handset on the telephone base
cradle.
To test your installation
Press on the telephone base. Listen for a
dial tone, and then press
up.
To unmount the base stand
Simply slide the base stand down, and lift it
from the telephone base.
EN - 10
again to hang