PCE Instruments PCE-MSM 4 User Manual page 17

To compare two measuring points or the intervals between the measuring points, two different
cursors can be set. The data is evaluated as shown in the figure above:
Cursor A
Max. Between A and B
Min. Between A and B
Cursor B
Average. Between A and B
Quantity. Between A and B
You can enlarge individual points within the graph by clicking on the desired area with the left
mouse button and holding it down. Now enlarge the desired observation field with the mouse until
the desired area is reached. Then release the mouse button and the area is enlarged accordingly.
Value cursor A
Maximum determined value between A and B
Minimum determined value between A and B
Value cursor B
Measured average value between A and B
Measured values between A and B
© PCE Instruments
15