Toshiba RAV-HM561UTP Series Service Manual page 110

No. Part name
Control
1. Detachment
5
P .C. board
1) Carry out work of item 1 of 2.
2) Remove connectors which are
connected from the control P.C. board
to the other parts and then remove
wiring from the clamp.
CN510 : Louver motor (20P, White)
CN214 : Signal receiving unit
CN34 : Float switch (3P, Red)
CN504 : Drain pump (2P, White)
CN101 : TC sensor (2P, Black)
CN102 : TCJ sensor (2P, Red)
CN104 : Room temp. Sensor
CN210 : Fan motor (5P, White)
NOTE :
Unlock the lock of the housing part and then
remove the connector.
3) Unlock the locks of the card edge spacer
2. Attachment
1) Fix the control P .C. board to the card edge
2) Connect the connector removed in item 1
3) Following to work of item 2 of
Procedure
(9P, White)
(2P, Yellow)
(4 positions) and then remove the control
P.C. board.
spacer (4 positions)
as before and then fix the wiring with the
clamp.
the electric parts box cover and the
suction grille as before.
Card edge spacer Card edge spacer Card edge spacer
2 , mount
- 110 -
Remarks
Clamp