Datavideo iCast 10NDI Instruction Manual page 16

5. Channel Buttons for Program OUT
Depending on your program layout, press the
channel buttons to select your program video
sources.
Note: The available program layouts are Quad
View, Full Screen, POP, Side by Side and PIP, which
can be selected using the OSD menu.
6. Multiview Layout Selection Buttons
Press the corresponding button to select either a
2x2 or 4x1 Multiview layout.
The fourth quadrant of the Multiview layout is
shared by channels 4 and 5 and can be changed by
pressing the respective MV button.
7. Record Button
Press the record button to activate program
recording. The record settings can be found on the
web UI.
8. Stream Button
Press the stream button to activate program
streaming. The stream settings can be found on the
web UI.
9. Hard Disk Drive Slot
Insert the assembled hard disk into this slot. See the
next section for disk assembly.
16