Datavideo iCast 10NDI Instruction Manual page 82

8.
As shown in the diagram below, enter the stream URL then click Play to start streaming.
Follow the steps below to obtain the HLS URL:
1. On the web UI, click the "Streaming" tab to open the stream settings page.
2. Select a stream engine then the encoder from the Encoder Source drop-down menu. See
Section 5.3 Encoder
3. Select HLS from the Stream Type drop-down menu.
4. Click the Start Stream button to start the stream.
5. Based on your settings, the device will automatically generate a .m3u8 stream URL:
http://192.168.1.201/hls/2/session0.m3u8
6. Enter the HLS URL into the client device.
7. Open VLC then click Open Network Stream (shown in the diagram below).
for setup of main and sub encoders.
82