3.1
OPERATIONAL PRINCIPLE
3.1.1
Intended Use
The lawn mower brush cutter you have purchased was designed and manufactured for cutting grass/brambles/brush on
uncultivated ground and underbrush, particularly suitable for finishing and cutting in land with the presence of debris.
The 60 versions were designed and manufactured to operate on level ground with a maximum slope of 15°, whilst the 60 Swing
Top versions were designed to work on a slope of up to 45°, always maintaining the motor aligned along the horizontal (0°).
The technical performance indicated in this manual refers exclusively to new products or those maintained efficient, following
the use, inspection and maintenance instructions.
As for any mechanical equipment, proper maintenance and its being kept clean are required. Lubricate the machine as
indicated. Follow the safety measures and indications described in this manual and illustrated on the adhesive safety labels and
signs on the machine.
3.2
DIMENSIONS
Model
BT 60
DCS 60
DCS 60 Traction
DCS 60 Swing Top
Table 3‐1: Dimensions
3.3
ENVIRONMENTAL CONDITIONS
The equipment does not require any particular environmental conditions. The machine may operate on dry grass, but also on
wet grass.
3.4
LIGHTING
The machine was designed and manufactured to work outdoors with natural light. In case of night time operation make sure
that sufficient artificial lighting is supplied with a source of at least 150 lux (UNI EN 12646‐2:2008).
Dimensions
Length (mm)
1600
1600
1600
1700
1 STARTER
2 AIR FILTER
3 FUEL TANK CAP
4 STARTER LEVER
5 FORWARD MOVEMENT ADJUSTMENT
6 THROTTLE LEVER
7 CUTTER ENGAGEMENT LEVER
8 FORWARD MOVEMENT ENGAGEMENT LEVER
9 CUTTING ADJUSTMENT
10 OIL FILLER CAP
11 PARKING BRAKE
12 SLOPE ADJUSTMENT LEVER
13 SPEED CHANGER CONTROL LEVER
Figure 3‐4: Details DCS 60 Swing Top
Length (mm)
580
630
580
540
Length (mm)
970
970
970
970