Quick Start Instructions - Verity Medical NeuroTrac Sports XL Operator's Manual

Quick Start Instructions

1. Insert a 9 volt PP3 Alkaline battery. Alternatively insert a
rechargeable Nickel Metal Hydride battery {which is safer and has a
much longer life than the Ni-Cad rechargeable batteries} into the
battery compartment.
2. Insert lead wire/s in to Channel A and B, if you are using two channels.
You may use up to four sets of lead wires, two for channel A and two
for channel B giving either 4 or 8 electrode placements on the body.
[Ivory = Channel A, Black = Channel B]
3. Switch on the unit by pressing the on/off button on the front of the
unit.
4. Press the PRG button to select one of the pre-set programmes P01 -
P21 outlined in the tables on page 13 to 23 or PC1 - PC3 for the
customised programmes (see page 11 for setting customised
programmes).
5. You can press the set button to change to the next phase of the current
programme if required.
6. To start the programme, press channel A + and / or B + if you are using
both channels, then increase the mA intensity to the desired level.
7. To stop the programme press the on/off button which will turn the
unit off or alternatively press the PRG button twice to return to the
home screen.
Low Battery Indicator
When the battery power is low, the low battery indicator will appear on the
screen (shown in the diagram on page 9). When the battery indicator shows
one bar, replace the battery.
Electrode Disconnection Indicator
When an electrode becomes disconnected or when an electrode no longer
conducts the electrical current or if the lead wires are faulty, the milliamp level
will return to zero and the eff ected channel will  ash on and off .
mA Lock
For added safety, the device includes an mA lock function. After the mA is
adjusted and there is no action for 60 seconds, the mA intensity will be locked
and pressing the mA+ button will not have any action. This is to prevent
unwanted mA increase. To increase the mA,  rstly press the mA- button, which
will unlock the mA, and then press the mA+ button to adjust.
Backlight
Your device includes a light-up screen to improve the legibility of the content
on the screen.
If no keypad buttons are pressed for more than 60 seconds the backlight will
be turned off to save energy, but will be activated again as soon as one of the
buttons is pressed.
®
NeuroTrac Sports XL Operation Manual
10