Quick Start Instructions - Verity Medical NeuroTrac Sports Operator's Manual

Quick Start Instructions

1. Insert a 9 volt PP3 Alkaline battery. Alternatively insert a
rechargeable Nickel Metal Hydride battery {which has a much
longer life than the Ni-Cad rechargeable batteries} into the battery
compartment.
2. Insert lead wire/s to Channel A and B if you are using two channels.
3. Switch on the unit by pressing the on/off button on the front of the
unit.
4. Press the PRG button to select one of the pre-set programmes P01 -
P15 or PC1 - PC3 for the customised programmes (see page 8 for
customised programmes).
5. When you have selected one of the programmes, (P01 - P15, PC1 -
PC3) press the + button/s to start the programme and to increase the
mA intensity.
6. To stop the programme press the on/off button which will
turn the unit off.
Lock Button
A "concealed" Lock button is included in the NeuroTrac™ Sports which
allows the clinician to accurately monitor "Home Compliance" of the patent
between appointments. It also locks the customised or built in programmes.
To Lock the Unit
1. Select the built in or customised programme required. In the case of
a customised programme, make sure that the pulse width, frequency,
time etc. are set-up correctly.
2. Remove the battery cover and, using a thin rod gently press on the
lock button as shown in the diagram on page 6 until you hear a
double beep. The unit is now "locked" and cannot be altered until
"unlocked"
To Unlock the Unit
Remove the battery cover and press the concealed switch with a thin rod until a
single beep is heard. Now the LCD will display the average mA used on each
channel and the total hours the unit has been in use as shown in the diagram.
To return to normal "unlocked" operation, simply press the ESC button.
Hours Used
NeuroTrac™ Sports Operation Manual
45
20mA 20mA
Ch.A Ch.B
7