Quick Start Instructions - Verity Medical NeuroTrac MultiTENS Operator's Manual

Quick Start Instructions

1. Insert a 9 volt PP3 Alkaline battery. Alternatively insert a rechargeable
Nickel Hydride battery [Which is safer and has a much longer life than
the Ni-Cad rechargeable batteries] into the battery compartment.
2. Insert lead wire/s to channel A and B if both channels are to be used.
3. Switch on the unit by pressing the Power button.
4. Press the PRG 1 [Programme] button to select:
P01 ~ P13 for preset TENS programmes. (Channel A only).
P14 ~ P17 for preset STIM programmes. (Channel A and B)
PC1 ~ PC3 for custom programmes. (Channel A and B).
5. To start press channel A+ and B+ button if you are using both
channels, increase the stimulation to the desired level.
6. Once the program is complete, you will hear five beeps.
7. To stop the programme, press the ON/OFF button which will turn the
unit off.
LCD Display
Channel A
Frequency /
Pulse Width
Channel A
Programme Mode /
Number
Channel A Channel B
programme programme
Channel A Channel B
milliamps milliamps
NeuroTrac
Programme
Time
Home Screen
Running Programme
Channel A & B
paused
Channel A
disconnected
electrode
STIM only programme
(both channels fixed to one
programme)
9
MultiTENS Operation Manual
®
Channel B
disconnected
electrode
Channel B
Frequency /
Pulse Width
Lock / Statistics
Symbol
Channel B
Programme Mode /
Number
Low battery
indicator