Lock Button - Verity Medical NeuroTrac Sports XL Operator's Manual

Lock Button

Lock symbol
( ashes when being
unlocked)
Programme
Hours and
minutes unit
was used in
the locked
mode
Average milliamps
A "concealed" lock button is included in the NeuroTrac
allows the clinician to accurately monitor "Home Compliance" of the patient
between appointments. It records the time in use and the average intensity (mA).
It also locks the customised programmes, stopping them from being altered.
To Lock the Unit
1. Select the pre-set or customised programme required. In the case of
a customised programme, make sure that the pulse width, frequency,
time etc. are set-up correctly.
2. Remove the battery cover and, using a thin rod gently press on the
lock button as shown in the diagram on page 8 until you hear a
double beep. The unit is now "locked" and cannot be altered until
"unlocked". Note: The lock symbol will appear on the LCD when
the unit is "locked".
To Unlock the Unit
Remove the battery cover and press the concealed switch with a thin rod until
a single beep is heard. Now the LCD will display the average mA used on each
channel and the total hours and minutes the unit has been in use as shown in
the diagram. To return to normal "unlocked" operation, simply press SET.
NeuroTrac
300 uS
P08
35 : 05
30 20
MA
Average milliamps for
CH.A
12
®
Sports XL Operation Manual
Frequency & pulse
width of phase
•Work
5 Hz
•Rest
•Alt
•Cont
•Mod
Min
MA
CH.B
®
Sports XL which
Phase mode
Number of phases
Minutes