Analog Devices EVAL-ADM2867EEBZ User Manual page 8

UG-1677
Table 3. Input Supply Configurations
Jumper LK8 V Pin
SEL
A Low
High
B Low
High
C Low
High
VREG_IN Input Voltage Range
Not used
Not used
6 V to 20 V
Invalid condition, 5 V isolated output is
not supported with V < 4.5 V
CC
4 V to 20 V
6 V to 20 V
EVAL-ADM2867EEBZ
V Supply
CC
Power V directly on connector P1 with a
CC
supply voltage between 3 V and 5.5 V
Power V directly on connector P1 with a
CC
supply voltage between 4.5 V and 5.5 V
Regulator provides 5 V supply to V
B
Regulator provides 3.3 V supply to V
Regulator provides 5 V supply to V
Rev. 0 | Page 8 of 12
User Guide
V Supply
ISO
3.3 V isolated output
5 V isolated output
3.3 V isolated output
CC
High
3.3 V isolated output
CC
5 V isolated output
CC