AEMC PowerPad IV Quick Start Manual page 15

Transient Mode
Press the

associated Transient measurements.
The Transient mode records voltage or current transients for a specified duration
determined by the selected configuration. It also records shock waves, which
are very high voltages for a very short time.
Inrush Current Mode
Press the

associated Inrush Current measurements.
The Inrush Current mode is used to capture and record inrush currents for a
duration specified by the selected configuration.
Alarm Mode
Press the

associated Alarm measurements.
The Alarm mode detects and records overshoots of the selected quantities in
configuration for a specified duration.
Power Quality Analyzer PowerPad
button and select a recording from the list to view the
button and select a recording from the list to view the
button and select a recording from the list to view the
IV Model 8345 Quick Start Guide
®
15