No.
1
fix it.
To detach the lens, press the lens detach button ②, turn the lens clockwise
counterclockwise and release the buckle.
I/O port installation
8.2.1 Cable connection
of the cable to be connected.
8.2.2 Removing the cable
connect.
Lens installation (2)
Table 8-2 Lens components
Name
Screw
After focusing, tighten the focusing ring screw and
Hold down the mini screwdriver to press the slot button
Insert the cable into the slot.
Release the screwdriver.
install the wire
Screwdriver
Use the mini screwdriver to press the button of the wire slot to
Remove the cable from the slot.
No.
Name
two
focus ring
Cable
30