Table of Contents
Advertisement
7 Entrance camera configuration
This feature is available on select models.
This series of devices can serve as the input to connect compatible wireless node devices such
as door/window contacts, sirens and PIR detectors to the XVR to form a local alarm network.
Once an alarm from a device on the network is triggered, the device transmits an alarm signal
according to the settings.
Connect the wireless node devices to the XVR with the gateway camera, and then set the
parameters.
For more detailed configuration, please refer to the user manual of the XVR or the
node device.
Connect node devices in OSD menu
In the OSD menu (Figure 3-7), selectAdvanced(advanced). configureto
register(enroll) inONand the device will enter sleep mode.
linkage.
Activate the node device and enter pairing mode according to the corresponding
manual.
After the pairing is finished, it is possible to check the information
of the device connected to the interfaceSensor Pairing(Sensor Paring).
Connect node devices on the XVR
From the XVR main menu (Figure 3-1), selectIoT > ADMINISTRATOR
> Sensor Linkage(IoT > MANAGER > Sensor Pairing).
click onAdd(add).
Network diagram
25
Advertisement
Table of Contents
