Table of Contents
Advertisement
5 Configuration of the temperature chamber and
The temperature and humidity camera can measure the ambient temperature and humidity and
display the value on the live interface.
Activate/Deactivate temperature and humidity
In the OSD menu (Figure 3-7), selectAdvanced > Temp. and humidity (Advanced > Temp.
& Humidity) to activate and deactivate the function. You can see the real-time temperature
and humidity in the image.
Set the temperature measurement mode
The temperature and humidity chamber supports temperature correction in strong light
outdoors. You can change the temperature measurement mode.
Measure Mode) to change the temperature measurement mode. Standard(Standard)
is set by default.
It is recommended to change the mode toStandard(standard) orSunlight(sunlight) when
be used indoors or outdoors, respectively.
Adjust temperature and humidity display
(Advanced > Temperature & Humidity > Location) in the OSD menu.
location displayed.
activeTemp. and humidity(Temp. & Humidity).
selectStandard(standard) orSunlight(sunlight) in themeasurement mode(
selectAdvanced > Temperature and humidity > Location
Check that the temperature and humidity function is activated.
Click the directional buttons on the PTZ menu to change the
Click onTo accept(Enter) to save the settings.
humidity
twenty-one
Advertisement
Table of Contents
