Table of Contents
Advertisement
Chapter 2
b
Connect the LAN cable to the Ethernet
network port on the back of the printer,
and then turn the printer on.
NOTE
• You can change the printer's
communication settings in the
[Communication settings] dialog box of
the "Printer Setting Tool". For more
information, see Communication Settings
(TD-2125N/2135N/2125NWB/2135NWB
only) on page 21.
• You can use the "Printer Setting Tool", to
apply communication settings to multiple
printers. For more information, see
Applying Setting Changes to Multiple
Printers on page 26.
Wireless LAN Connection
The following Wi-Fi connection methods are
available:
Using a Wi-Fi router or access point
(Infrastructure Mode)
Without using a Wi-Fi router or access
point (Wireless Direct)
Using Infrastructure Mode and Wireless
Direct simultaneously
Using WPS (Wi-Fi Protected Setup)
Using a Wi-Fi Router or Access Point
(Infrastructure Mode)
Infrastructure Mode allows you to connect the
printer to a computer or mobile device via a
Wi-Fi router or access point.
Before You Begin
Make sure you configure the printer's
Wi-Fi settings to communicate with your
Wi-Fi router or access point. After the
printer is configured, computers and
mobile devices on your network will have
access to the printer.
14
• Before connecting the printer to your
network, contact your system
administrator to confirm your Wi-Fi
network settings.
• To reconfigure the Wi-Fi settings, or if
the status of the printer's Wi-Fi
connection is unknown, reset the
printer's Wi-Fi settings.
a
Press and hold the
button and the
until the POWER indicator turns
orange and the STATUS indicator
flashes green.
b
While holding down the
(Power) button, press the
(Feed) button twice.
c
Release the
2
• Make sure there are minimal
obstructions between the wireless
router or access point and the printer.
Large objects, walls and other
electronic devices can affect the
transfer speed of the print data.
Connect the printer to your Wi-Fi router
or access point
Make sure you configure the printer's
Wi-Fi settings to communicate with your
Wi-Fi router or access point. After the
printer is configured, computers and
mobile devices on your network will have
access to the printer.
2
a
Make sure the printer is turned off.
b
Write down the SSID (Network
Name) and Password (Network Key)
of your WiFi router or access point.
c
Connect the printer and computer
using a USB cable.
d
On the printer, press and hold the
(Print), the
(Power) buttons until the POWER
indicator and the STATUS indicator
flash green alternately.
(Feed)
(Power) button
(Power) button.
(Feed) and the
Advertisement
Table of Contents
